Floating table normal

A floating table

Beginner

90min

Required tools

Board (thickness and dimensions as required

Drilling machine

open-end spanner

dowel

Step by step manual

Step 1

Drill holes in the board at the corners.

Step 2

Drill 6 holes in the ceiling and insert dowels into the four holes

Drill 4 holes in the ceiling at the same spacing as the holes on the panel.

Step 3

Screw an eyebolt into each of the two dowels on the ceiling near the wall and screw a bird roller into each of the other four holes

Step 4

Insert a ring nut through each of the holes in the plate and counter-lock with a nut

Step 5

Make a loop around the rope thimble with the end of the rope (4X)

Step 6

Place both rope ends in the rope clamp below the rope thimble

Step 7

Tighten the nuts in the cable clamp

Step 8

Attach a carabiner to each rope thimble

Step 9

Hang a carabiner with a block rope pulley twice in the eyebolts. Guide the rope through this

Step 10

Attach two rope cleats to the wall for the remaining rope.