High table
High table
The suspended bar table
Beginner
90min
Required tools
Magnets 2 pieces
Drilling machine
Crate tape 140x35x2mm (2 pieces)
Wood screws 2.5X15 and 4.4X50
Dowels 6X50
Wooden board e.g. 70X100
Step by step manual
1
Step 1
Paint the picture frame in the desired colour.
2
Step 2
Screw each crate hinge onto the panel with the same side spacing
3
Step 3
Drill holes in the wall and fit dowels, then attach the crate tape.
Place a table under the top so that it is straight and the crate strap can be easily attached.
4
Step 4
Screw the eye plate to the centre of the plate
5
Step 5
Drill holes in the wall for the second eye plate. So that the eye plate on the table just touches the one on the wall.
6
Step 6
Fix the chain to both eye plates using the quick-release chain fastener.
7
Step 7
Fix the picture frame with the picture to the underside of the panel.
8
Step 8
Attach the magnets to the eyebolts. The table can now be folded up and down as required.